













- 3 DoF vibration attenuation inside the cryostat
- Vibration attenuation just below the experiment
- High insensitivity to cables and thermal braids
- High payload to carry the complete experiment
- Optimal performance with JPE stages
- High Q factor (no forced damping)
- All phosphor bronze construction, nonmagnetic
- Central open aperture
- Up to 6kg load capacity
Receive our price list by email, no costs, obligations or spam. We only ask basic contact details to send it to.
Need help, any additional information or support?
Product description
The Cryo Vibration Isolation Platform (CVIP) is a passive vibration isolation platform with z, Rx and Ry attenuation of floor vibrations (read our application note on Z-Transmissibility Measurements). It is placed directly on the cryostat cold plate and carries the experiment. It is a relatively stiff spring design, which results in atypical high cut-off frequencies and high payload. Although this will limit the damping of low frequencies, compared to conventional dampers with low cut-off frequencies, it is much more insensitive to added cables and thermal braids between cold plate and experiment. These can become the limiting factor for stability in conventional dampers.
- Downloads
- Specifications
- Product options
- Product configurations
- Controller
- Videos
specs | unit | CVIP1 | CVIP2 | CVIP3 |
---|---|---|---|---|
Isolated axes | - | z, Rx, Ry | ||
Main dimensions | mm | ø 50 x 21.8 | ø90 x 25.8 | ø120 x 26.3 |
Central open aperture | mm | ø16 | ø22 | ø45 |
Weight | kg | 0.15 | 0.7 | 1.3 |
Max payload | kg | 0.5 | 1.5 | 6 |
Moving mass excluding payload | kg | 0.07 | 0.41 | 0.69 |
Linear stiffnes z-axis* | N/m | 3.90E+04 | 7.80E+04 | 4.70E+05 |
Rotation stiffness x-axis* | Nm/rad | 7.8 | 47.5 | 613 |
Rotation stiffness y-axis* | Nm/rad | 7.8 | 47.5 | 613 |
Rotation axis position below platform | mm | -14.7 | -18.2 | -17.6 |
z, Rx, Ry cut-off frequencies @ max payload** | Hz | 42, 12, 12 | 32, 17, 17 | 42, 30, 30 |
Bi-directional | - | can be used upside down (hanging) | ||
Overload protection endstops | mm | +/-0.5 | ||
Main construction material | - | Phosphor bronze | ||
* ±20% | ||||
** ±10%. Payload center of gravity on center axis, 35mm above platform |
HV rated positioners can realistically be considered compatible with pressures as low as 1E-8 mbar. Lower pressures can be achieved by prolonged baking of positioners in vacuum at 100-150 deg C, depending on the type of positioner. Upon request JPE can provide such service at additional costs.
CVIP1 /HV: Cryogenic Vibration Isolation Platform 1
CVIP2 /HV: Cryogenic Vibration Isolation Platform 2
CVIP3 /HV: Cryogenic Vibration Isolation Platform 3
Passive instrument, no controller required.